“Tinkering EU: Building Science Capital for All” aims to develop activities and resources that support a learner-centred culture, improve science education and develop 21st century skills - all of which are fundamental for active citizenship, employability, and social inclusion. To do this, it adopts ‘Tinkering’, an innovative pedagogy developed in the USA, which is used by museums, and has proven able to create a lifelong engagement with science for everyone. Tinkering works particularly well for people who argue that “they are not good at science” or are disaffected from any formal teaching and learning process. It can be a powerful tool to tackle disadvantage. The project integrates Tinkering into the school curriculum to develop the science capital of disadvantaged youth through the use of museums. It addresses students from 8 to 14 years old (primary and junior high schools).
Coordinator: National Museum of Science and Technology Leonardo da Vinci
Partners:
University of Cambridge – UK
NEMO Science Museum – The Netherlands
Science Gallery Dublin – Ireland
CosmoCaixa – Spain
Science Center Network – Austria
NOESIS – Greece
In this literature review, we seek to understand in what ways aspects of computer science education and making and makerspaces may support the ambitious vision for science education put forth in A Framework for K-12 Science as carried forward in the Next Generation Science Standards. Specifically, we examine how computer science and making and makerspace approaches may inform a project-based learning approach for supporting three-dimensional science learning at the elementary level. We reviewed the methods and findings of both recently published articles by influential scholars in computer
DATE:
TEAM MEMBERS:
Samuel SeveranceSusan CodereEmily MillerDeborah Peek-BrownJoseph Krajcik
As the maker movement is increasingly adopted into K-12 schools, students are developing new competences in exploration and fabrication technologies. This study assesses learning with these technologies in K-12 makerspaces and FabLabs.
Our study describes the iterative process of developing an assessment instrument for this new technological literacy, the Exploration and Fabrication Technologies Instrument, and presents findings from implementations at five schools in three countries. Our index is generalizable and psychometrically sound, and permits comparison between student confidence
DATE:
TEAM MEMBERS:
Paulo BliksteinZaza KabayadondoAndrew P. MartinDeborah A. Fields
Out-of-school settings promise to broaden participation in science to groups that are often left out of school-based opportunities. Increasing such involvement is premised on the notion that science is intricately tied to “the social, material, and personal well-being” of individuals, groups, and nations—indicators and aspirations that are deeply linked with understandings of equity, justice, and democracy. In this essay, the authors argue that dehistoricized and depoliticized meanings of equity, and the accompanying assumptions and goals of equity-oriented research and practice, threaten to
This NSF INCLUDES Design and Development Launch Pilot (named ALCSE-INCLUDES) project will develop and implement an innovative computer science (CS) education model that will provide all 8th grade students in 3 districts in Alabama's 'Black Belt' with exciting and structured hands-on activities intended to make CS learning enjoyable. The course will use an educational style called "learning CS by making" where students will create a CS-based product (such as a robot) and understand the concepts that make the product work. This hands-on approach has the potential to motivate diverse student populations to pursue higher level CS courses and related disciplines during and after high school, and to join the CS workforce, which is currently in need of more qualified workers.
ALCSE-INCLUDES Launch Pilot will unite the efforts of higher education institutions, K-12 officials, Computer Science (CS)-related industry, and community organizations to pursue a common agenda: To develop, implement, study, and evaluate a scalable and sustainable prototype for CS education at the middle school level in the Alabama Black Belt (ABB) region. The ABB is a region with a large African-American, low-income population; thus, the program will target individuals who have traditionally had little access to CS education. The prototype for CS education will be piloted with 8th grade students in 3 ABB schools, using a set of coordinated and mutually reinforcing activities that will draw from the strengths of all members of the ALCSE Alliance. The future scaled-up version of the program will implement the prototype in the 73 middle schools that comprise ALL 19 school districts of the ABB. The program's main innovation is to provide CS education using a makerspace, a dedicated area equipped with grade-appropriate CS resources, in which students receive mentored and structured hands-on activities. The goal is to engage ALL students, in learning CS through making, an evidence-based pedagogical approach expected to reinforce skills and promote deep interest in CS.
DATE:
-
TEAM MEMBERS:
Shaik JeelaniBruce CrawfordMohammed QaziJeffrey GrayJacqueline Brooks
The Maker movement has grown considerably over the past decade, both in the USA and internationally. Several varieties of Making have been developed, but there are still many important questions to ask and research to conduct about how different programmatic structures may relate to the potential impact Maker programs can have on individuals and communities. WestEd, in collaboration with the Lucile Packard Children's Hospital, the University of Michigan C. S. Mott Hospital Children's Hospital, and the Children's Hospital of Orange County, is conducting a year-long exploratory research study that will focus on the out-of-school learning by adolescents and young adults in children's hospitals. This research study will focus on mobile and dedicated Makerspaces in hospitals to support patients' learning. The application of Makerspaces to hospital environments is a unique opportunity to research a critical need of chronically ill individuals, i.e. to explore how Making can enhance patients' agency, creative STEM learning, and physical well-being. The proposed study is building on the prior work of the principal investigator and will: (1) examine the nature and processes of learning in children's hospitals; (2) revise the current design of the mobile Makerspace and the associated implementation model in response to variations in programmatic contexts across multiple hospital settings and disparate patients' conditions; and (3) investigate and test the effectiveness of the Makerspace approach as it relates to both patients' learning and health outcomes. The study would contribute to longer-term efforts to develop a comprehensive, scalable, and sustainable strategy to determine the programmatic viability of the mobile Makerspace approach across a more varied array of hospital settings. This project has the potential to have a much broader impact by reaching out to other isolated students beyond the hospital environment, including those in residential treatment facilities for behavioral and emotional problems, as well as those attending programs designed to help youth who have been in trouble with the law get back on track. This project is funded by the Advancing Informal STEM Learning (AISL) program, which seeks to advance new approaches to, and evidence-based understanding of, the design and development of STEM learning in informal environments. This includes providing multiple pathways for broadening access to and engagement in STEM learning experiences, advancing innovative research on and assessment of STEM learning in informal environments, and developing understandings of deeper learning by participants.
This project's goals are to contribute to the understanding of how to: (1) describe and measure the education and health impact of mobile Makerspaces on chronically ill patients, and (2) design and sustain implementation models in various hospital settings. Since a children's hospital is a challenging context to support a patient's learning, it is not typically conducive to learning. Patients are constantly interrupted by the demands of the illness, by the strict protocols that need to be adhered to, and by the medical staff who manage their exhaustive treatment regimens. The mobile Makerspace is intended to adjust the environment in deliberate ways, allowing researchers to study and observe what kinds of learning intervention models enable youth and young adults to recapture a sense of their own agency and enable them to see themselves as creators, and makers of things that improve their own and others' lives. The project will have two strands: one on learning and one on adaptation of the model. In the learning strand, the study will investigate how engaging with the Makerspace can enhance patients' learning by provoking their sense of curiosity, encouraging them to set up and pursue personal goals via invention, and inspiring them to feel more agentive in taking charge of their learning process i.e., development of affinity for and fluency in the ways of knowing, doing and being (the epistemologies and ontologies) of engineers or scientists. In the adaptation strand, they will identify challenges and opportunities for implementing Makerspaces and develop an implementation plan that provides a process for introducing Makerspaces into hospital settings.
The Maker movement has grown considerably over the past decade, both in the USA and internationally. Several varieties of "making" have been developed, but there are still many important questions to ask and research to conduct about how different programmatic structures may relate to the potential impact Maker programs can have on individuals and communities. As part of a larger, long-range initiative in their local community, the New York Hall of Science proposes to leverage the philosophy and activities of the Maker movement to take important first steps toward realizing their eventual goal of developing family and community-wide commitment to and improvement of STEM education. The project would build both foundational and practical knowledge about how parents with little or no prior knowledge of or experience with Making choose to engage with, contribute to, and learn from Maker programming designed for families with children from low-income households and backgrounds that are under-represented in the STEM professions. The intent is to build their understanding of the value of Making as a pathway toward deeper STEM learning. The project is characterized as "high-risk with potentially high-payoff." It applies a community psychology approach (rather than individual psychology) to the study of Making, and it focuses on parents as potential learners and leaders. While some work has been done in the field with respect to the role of parents in Maker environments, this is a new approach to the study of Making and its potential influence on the broader culture of STEM learning in a community. This project is funded by the Advancing Informal STEM Learning (AISL) program, which seeks to advance new approaches to, and evidence-based understanding of, the design and development of STEM learning in informal environments. This includes providing multiple pathways for broadening access to and engagement in STEM learning experiences, advancing innovative research on and assessment of STEM learning in informal environments, and developing understandings of deeper learning by participants.
Two informal learning environments will be developed and studied at the New York Hall of Science: Learning Together, a table-top, minimally staff-facilitated setting in the Hall's science library, and Family Making, a high-tech and staff-facilitated experience in the Hall's maker facility. The study poses two research questions: (1) How, and to what extent, do the Learning Together and Family Making programs attract and sustain parental engagement, parental facilitation of children's activity, and parents' own explorations of Making? (2) From a community psychology perspective, what social structures, resources, social processes, and surrounding institutional conditions support or impede these parental pathways into exploring and understanding Making as a pathway toward STEM learning? The study will involve sustained collaborations between the Hall's Maker Space staff and research team, and will seek to generate guidance about how to design Maker programming that attracts and retains low-income, under-served family groups and new knowledge about how external structures and practices shape this audiences' perceptions of and interest in Making as a mode of STEM learning.
As part of its overall strategy to enhance learning in informal environments, the Advancing Informal STEM Learning (AISL) program funds innovative research, approaches and resources for use in a variety of settings. There are few empirical studies of sustained youth engagement in STEM-oriented making over time, how youth are supported in working towards more robust STEM related projects, on the outcomes of such making experiences among youth from historically marginalized communities, or on the design features of making experiences which support these goals. The project plans to conduct a set of research studies to develop: a theory-based and data-driven framework for equitably consequential making; a set of related individual-level and program-level cases with exemplars (and the associated challenges) that can be used by researchers and practitioners for guiding the field; and an initial set of guiding principles (with indicators) for identifying equitably consequential making in practice. The project will result in a framework for equitably consequential making with guiding principles for implementation that will contribute to the infrastructure for fostering increased opportunities to learn among all youth, especially those historically underrepresented in STEM.
Through research, the project seeks to build capacity among STEM-oriented maker practitioners, researchers and youth in the maker movement around equitably consequential making to expand the prevailing norms of making towards more transformative outcomes for youth. Project research will be guided by several questions. What do youth learn and do (in-the-moment and over time) in making spaces that work to support equity in making? What maker space design features support (or work against) youth in making in equitably consequential ways? What are the individual and community outcomes youth experience in STEM-making across settings and time scales? What are the most salient indicators of equitably consequential making, how do they take shape, how can these indicators be identified in practice? The project will research these questions using interview studies and critical longitudinal ethnography with embedded youth participatory case study methodologies. The research will be conducted in research-practice partnerships involving Michigan State University, the University of North Carolina at Greensboro and 4 local, STEM- and youth-oriented making spaces in Lansing and Greensboro that serve historically underrepresented groups in STEM, with a specific focus on youth from lower-income and African American backgrounds.
As part of its overall strategy to enhance learning in informal environments, the Advancing Informal STEM Learning (AISL) program funds innovative research, approaches and resources for use in a variety of settings. The project plans to deliver and improve a constructivist professional development (PD) program called Remake Making for library staff that work with youth in maker spaces. The proposed project will be led by a team at the University of Pittsburgh and builds on a pilot facilitation framework developed in an earlier project by this team. The PD program responds to the rapid growth of makerspaces with a constructivist PD program focused on facilitation. Maker spaces are a new service model in many public libraries, part of a broader shift in general library services. Effective facilitation for learning, like that required in makerspaces, is a relatively new facet of librarianship that is not a consistent part of librarian education or PD. The project will work with two local library systems with libraries that have makerspaces but little to no PD opportunities around facilitation. The project plans to iteratively design and investigate the Remake Making program, its impact on library maker facilitators and their interactions with child and youth learners. This will provide a setting for preliminary research about constructivist PD and the experiences and struggles of staff who facilitate making in libraries within the context of shifting library norms. This project will produce an efficient, maker-friendly PD system for facilitation in makerspaces, applicable to a broad range of informal and formal educators who wish to incorporate facilitated making.
The project plans to conduct an iterative development process involving several cohorts of participants and using multiple data sources which include embedded PD workshop data, participant pre-post surveys, observation of library makerspaces, and interviews/focus groups. A participatory approach will be employed by involving participants in creating and refining research questions within the scope of the project. This approach is designed around inquiry-based improvement, which is experienced by participants as reflective practice or continuous improvement. The proposed project aims to advance knowledge and PD strategies for facilitation in library makerspaces. The research will build knowledge about the efficacy of an innovative constructivist PD program with adaptation as a key feature. The data collected in the context of the development of this innovation will provide opportunities for applied research about informal STEM learning in the context of library maker spaces, and the role that library staff play in facilitating this type of learning.
This report introduces a framework to support learning in library and museum makerspaces. The framework demonstrates how we can create the conditions for ambitious learning experiences to unfold within the making experience.
DATE:
TEAM MEMBERS:
Children's Museum of PittsburghInstitute of Museum and Library ServicesPeter Wardrip
In prior research and development, the project team developed PocketLab, a set of web-based hands-on science simulations for middle school classrooms. With this Phase I funding, the team will develop and test a prototype of CloudLab, a classroom management platform to extend the functionality of PocketLab. The prototype will include a portal so that a class of students can collaborate on experiments, a lab notebook to analyze experimental data with graphing tools, and a teacher dashboard to monitor student progress in real time. In the Phase I pilot research, with six middle school teachers and 150 students, the project team will examine whether the prototype functions as planned, whether teachers are able to integrate it within the classroom environment, and whether students are engaged while using the prototype.
Ideas from social justice can help us understand how equity issues are woven through out-of-school science learning practices. In this paper, I outline how social justice theories, in combination with the concepts of infrastructure access, literacies and community acceptance, can be used to think about equity in out-of-school science learning. I apply these ideas to out-of-school science learning via television, science clubs and maker spaces, looking at research as well as illustrative examples to see how equity challenges are being addressed in practice. I argue that out-of-school science