This article presents some of the challenges faced in developing an interactive exhibit on nanoscience and nanotechnology in Brazil. Presenting a scientific-technological area which is still in formation and which is little known by the population leads to a (re)consideration of the role of museums and science centers in the conformation and consolidation of scientific practice itself. Museographically, the exhibit deals with the challenge of making matter visible in an expression which is distant from the human perception. Some reflections are presented here on the option of musealization
DATE:
TEAM MEMBERS:
Sandra MurrielloDjana ContierMarcelo Knobel
The attacks of September 11 2001 and in particular, the sending of letters containing anthrax spores the following October had a profound effect on society, and at the same time on science and its communicative mechanisms. Through a quanto-qualitative analysis of articles taken from four publications: two daily newspapers, the Corriere della Sera from Italy and the New York Times from the United States and two science magazines, Science and Nature, we have shown how the aforementioned events provoked the emergence of media attention regarding bioterrorism. A closer reading of the articles
The Royal Society published in late June a report entitled «Science Communication. Survey of factors affecting science communication by scientists and engineers». It is an in-depth survey on the communication addressed to non-specialist audiences that was carried out interviewing a wide and representative sample of UK scientists and engineers.
The people of Val di Susa (Italy) blocked the construction of the new high-speed railway line that should connect Turin with Lyons (France). This project is regarded as a strategic achievement for the economic development of the European Union, but local communities have a different concept of development and are asserting their rights through ad hoc experts’ reports and the production “from the bottom” of new specialised knowledge. We shall describe these events as a case study to put ecological democracy to the test of facts, also through a comparison with the experimental actions taken in
DATE:
TEAM MEMBERS:
Yurij CastelfranchiGiancarlo Sturloni
resourceprojectProfessional Development, Conferences, and Networks
The Coalition for Science After School (CSAS) was established in 2004 in response to the growing need for more STEM (science, technology, engineering, and mathematics) learning opportunities in out-of-school time. CSAS sought to build this field by uniting STEM education goals with out-of-school time opportunities and a focus on youth development. Over a decade of work, CSAS Steering Committee members, staff and partners advocated for STEM in out-of-school-time settings, convened leaders, and created resources to support this work. CSAS leadership decided to conclude CSAS operations in 2014, as the STEM in out-of-school time movement had experienced tremendous growth of programming and attention to science-related out-of-school time opportunities on a national level. In its ten-year strategic plan, CSAS took as its vision the full integration of the STEM education and out-of-school time communities to ensure that quality out-of-school time STEM opportunities became prevalent and available to learners nationwide. Key CSAS activities included: (1) Setting and advancing a collective agenda by working with members to identify gaps in the field, organizing others to create solutions that meet the needs, identifying policy needs in the field and supporting advocates to advance them; (2) Developing and linking committed communities by providing opportunities for focused networking and learning through conferences, webinars, and other outreach activities; and (3) Identifying, collecting, capturing, and sharing information and available research and resources in the field. The leadership of the Coalition for Science After School is deeply grateful to the funders, partners, supporters, and constituents that worked together to advance STEM in out-of-school time during the last decade, and that make up today's rich and varied STEM in out-of-school time landscape. We have much to be proud of, but as a movement there is much more work to be done. As this work continues to expand and deepen, it is appropriate for the Coalition for Science After School to step down as the many other organizations that have emerged over the last decade take on leadership for the critical work that remains to be done. A timeline and summary of CSAS activities, products, and accomplishments is available for download on this page. All resources noted in the narrative are also available for download below.
This award is for a Science and Technology Center devoted to the emerging area of nanobiotechnology that involves a close synthesis of nano-microfabrication and biological systems. The Nanobiotechnology Center (NBTC) features a highly interdisciplinary, close collaboration between life scientists, physical scientists, and engineers from Cornell University, Princeton University, Oregon Health Sciences University, and Wadsworth Center of the New York State Health Department. The integrating vision of the NBTC is that nanobiotechnology will be the genesis of new insights into the function of biological systems, and lead to the design of new classes of nano- and microfabricated devices and systems. Biological systems present a particular challenge in that the diversity of materials and chemical systems for biological applications far exceeds those for silicon-based technology in the integrated-circuit industry. New fabrication processes appropriate for biological materials will require a substantial expansion in knowledge about the interface between organic and inorganic systems. The ability to structure materials and pattern surface chemistry at small dimensions ranging from the molecular to cellular scale are the fundamental technologies on which the research of the NBTC is based. Nanofabrication can also be used to form new analytical probes for interrogating biological systems with unprecedented spatial resolution and sensitivity. Three unifying technology platforms that foster advances in materials, processes, and tools underlie and support the research programs of the NBTC: Molecules of nanobiotechnology; Novel methods of patterning surfaces for attachment of molecules and cells to substrates; and Sensors and devices for nanobiotechnology. Newly developed fabrication capabilities will also be available through the extensive resources of the Cornell Nanofabrication Facility, a site of the NSF National Nanofabrication Users Network. The NBTC will be an integrated part of the educational missions of the participating institutions. NBTC faculty will develop a new cornerstone graduate course in nanobiotechnology featuring nanofabrication with an emphasis on biological applications. Graduate students who enter the NBTC from a background in engineering or biology will cross-train in the other field by engaging in a significant level of complementary course work. Participation in the NBTC will prepare them with the disciplinary depth and cross-disciplinary understanding to become next generation leaders in this emerging field. An undergraduate research experience program with a strong mentoring structure will be established, with emphasis on recruiting women and underrepresented minorities into the program. Educational outreach activities are planned to stimulate the interest of students of all ages. One such activity partnered with the Science center in Ithaca is a traveling exhibition for museum showings on the subject of nano scale size. National and federal laboratories and industrial and other partners will participate in various aspects of the NBTC such as by hosting interns, attendance at symposia and scientist exchanges. Partnering with the industrial affiliates will be emphasized to enhance knowledge transfer and student and postdoctoral training. This specific STC award is managed by the Directorate for Engineering in coordination with the Directorates for Biological Sciences, Mathematical and Physical Sciences, and Education and Human Resources.
This Nanoscale Science and Engineering Center (NSEC) is a collaboration among Harvard University, the Massachusetts Institute of Technology, the University of California—Santa Barbara, and the Museum of Science—Boston with participation by Delft University of Technology (Netherlands), the University of Basel (Switzerland), the University of Tokyo (Japan), and the Brookhaven, Oak Ridge, and the Sandia National Laboratories. The NSEC combines "top down" and "bottom up" approaches to construct novel electronic and magnetic devices with nanoscale sizes and understand their behavior, including quantum phenomena. Through a close integration of research, education, and public outreach, the Center encourages and promotes the training of a diverse group of people to be leaders in this new interdisciplinary field.
The Nanoscale Science and Engineering Center entitled New England Nanomanufacturing Center for Enabling Tools is a partnership between Northeastern University, the University of Massachusetts Lowell, the University of New Hampshire, and Michigan State University. The NSEC unites 34 investigators from 9 departments. The NSEC is likely to impact solutions to three critical and fundamental technical problems in nanomanufacturing: (1) Control of the assembly of 3D heterogeneous systems, including the alignment, registration, and interconnection at three dimensions and with multiple functionalities, (2) Processing of nanoscale structures in a high-rate/high-volume manner, without compromising the beneficial nanoscale properties, (3) Testing the long-term reliability of nano components, and detect, remove, or prevent defects and contamination. Novel tools and processes will enable high-rate/high-volume bottom-up, precise, parallel assembly of nanoelements (such as carbon nanotubes, nanorods, and proteins) and polymer nanostructures. This Center will contribute a fundamental understanding of the interfacial behavior and forces required to assemble, detach, and transfer nanoelements, required for guided self-assembly at high rates and over large areas. The Center is expected to have broader impacts by bridging the gap between scientific research and the creation of commercial products by established and emerging industries, such as electronic, medical, and automotive. Long-standing ties with industry will also facilitate technology transfer. The Center builds on an already existing network of partnerships among industry, universities, and K-12 teachers and students to deliver the much-needed education in nanomanufacturing, including its environmental, economic, and societal implications, to the current and emerging workforce. The collaboration of a private and two public universities from two states, all within a one hour commute, will lead to a new center model, with extensive interaction and education for students, faculty, and outreach partners. The proposed partnership between NENCET and the Museum of Science (Boston) will foster in the general public the understanding that is required for the acceptance and growth of nanomanufacturing. The Center will study the societal implications of nanotechnology, including conducting environmental assessments of the impact of nanomanufacturing during process development. In addition, the Center will evaluate the economic viability in light of environmental and public health findings, and the ethical and regulatory policy issues related to developmental technology.
DATE:
-
TEAM MEMBERS:
Ahmed BusnainaNicol McGruerGlen MillerCarol BarryJoey Mead
The goal of this engineering education project entitled EXTRAORDINARY WOMEN ENGINEERS (EWE) is to encourage more academically prepared high school girls to consider engineering as an attractive option for post-secondary education and subsequent careers in order to increase the number of women who make up the engineering workforce. Specific project objectives are to: 1) mobilize America's more than one million engineers to reach out to educators, school counselors, and high school girls with tested messages tailored to encourage participation in engineering education and careers; 2) help high school counselors and science, math, and technology teachers to better understand the nature of engineering, the academic background needed to pursue engineering, and the career paths available in engineering; 3) equip high school counselors and teachers to share this information with students, especially girls; and 4) reach out to girls directly with messages that accurately reflect the field of engineering and will inspire girls to choose engineering. The WGBH Educational Foundation has partnered with the American Association of Engineering Societies (AAES), American Society of Civil Engineers (ASCE), and a coalition of more than 50 of the country's engineering associations, colleges, and universities to fundamentally shift the way the engineering and educational communities portray engineering. Based on a needs assessment performed in 2004, the EWE coalition embraces a communication strategy that focuses on the societal value and rewards of being an engineer, as opposed to the traditional emphasis on the process and challenges of becoming an engineer. This project represents a nationwide outreach effort that includes training opportunities for engineers; targeted Web-based and print resources for students, school counselors and teachers, and engineers; and a range of outreach and marketing activities.
DATE:
-
TEAM MEMBERS:
Julie BenyoPatrick NataleF. Suzanne Jenniches
The National Center for Earth-surface Dynamics (NCED) is a Science and Technology Center focused on understanding the processes that shape the Earth's surface, and on communicating that understanding with a broad range of stakeholders. NCED's work will support a larger, community-based effort to develop a suite of quantitative models of the Earth's surface: a Community Sediment Model (CSM). Results of the NCED-CSM collaboration will be used for both short-term prediction of surface response to natural and anthropogenic change and long-term interpretation of how past conditions are recorded in landscapes and sedimentary strata. This will in turn help solve pressing societal problems such as estimation and mitigation of landscape-related risk; responsible management of landscape resources including forests, agricultural, and recreational areas; forecasting landscape response to possible climatic and other changes; and wise development of resources like groundwater and hydrocarbons that are hosted in buried sediments. NCED education and knowledge transfer programs include exhibits and educational programs at the Science Museum of Minnesota, internships and programs for students from tribal colleges and other underrepresented populations, and research opportunities for participants from outside core NCED institutions. The Earth's surface is the dynamic interface among the lithosphere, hydrosphere, biosphere, and atmosphere. It is intimately interwoven with the life that inhabits it. Surface processes span environments ranging from high mountains to the deep ocean and time scales from fractions of a second to millions of years. Because of this range in forms, processes, and scales, the study of surface dynamics has involved many disciplines and approaches. A major goal of NCED is to foster the development of a unified, quantitative science of Earth-surface dynamics that combines efforts in geomorphology, civil engineering, biology, sedimentary geology, oceanography, and geophysics. Our research program has four major themes: (1) landscape evolution, (2) basin evolution, (3) biological sediment dynamics, and (4) integration of morphodynamic processes across environments and scales. Each theme area provides opportunities for exchange of information and ideas with a wide range of stakeholders, including teachers and learners at all levels; researchers, managers, and policy makers in both the commercial and public sectors; and the general public.
DATE:
-
TEAM MEMBERS:
Efi Foufoula-GeorgiouChristopher PaolaGary Parker
Robotics brings together learning across mechanism, computation and interaction using the compelling model of real-time interaction with physically instantiated intelligent devices. The project described here is the third stage of the Personal Rover Project, which aims to produce technology, curriculum and evaluation techniques for use with after-school, out-of-school and informal learning environments mediated by robotics. Our most recent work has resulted in the Personal Exploration Rover (PER), whose goal is to create and evaluate a robot interaction that will educate members of the general
To help answer questions about the behavior of participants in human-robot systems, we propose the Cognitive Evaluation of Human-Robot Systems (CEHRS) method based on our work with the Personal Exploration Rover (PER). The CEHRS method consists of six steps: (1) identify all system participants, (2) collect data from all participant groups, including the system’s creators, (3) analyze participant data in light of system-wide goals, (4) answer targeted questions about each participant group to determine the flow of knowledge, information, and influence throughout the system, (5) look for